soundlevel meter, calibrator, Noisemapping software, noise, and vibration monitoring online.
An extensive range of online noise control equipment and accessories, noise calculation software, type 1 microphones, and other instruments.
Noise News Blog
Sound Measuring Instruments
> Data Aquisitions Hardware, soundcard ICCP
In Audio Measurement and Analysis.
Data Aquisitions Hardware, soundcard ICCP
BSWA Data Acquisition Hardware
Put me on the Waiting List
Add to Cart
Review this item
Email a friend
Data Acquisition Hardware MC3022/MC3522/MC3242
DATA ACQUISITION INSTRUMENT MC3022/MC3522/MC3242 Model MC3022 MC3522 MC3242
Input Channel 2, ICCP (4 mA) 4, ICCP (4 mA)
Max Input Voltage 1.0 Vrms 3.5 Vrms
Output Channel 1 1, with 20W power amplifier 2
Max Output Voltage 1.0 Vrms
Frequency Response IEC 61672 Type 2 20 Hz ~ 20 kHz
Connector BNC A/D Converter 16 bits 24 bits Max. Sampling Frequency 44.1 kHz 50 kHz
Internal Noise 30 dB (A)
Frequency Response (Ref: 250 Hz, + 0.5 dB/-1.0 dB) 20 Hz ~ 20 kHz Measurement Range (With MPA201) 35 ~ 118 dB (A) 30 ~ 130 dB (A)
Power Requirement USB USB (220/110 V when power amplifier works) US MC3022 is a USB powered
Plug-N-Play measurement soundcard with two ICCP input channels and one output source channel. It is the perfect start to building your own two-channel sound and vibration measurement system. The input channels can be connected to any ICCP powered sensor such as BSWA ICCP microphones. MC3022 can also be used with a number of software including BSWA VA-LAB, WinMLS, DIRAC, EASERA, Audio Tester, Listen, ETF, Noise Book, Spectral Plus, and LabView, just to name a few.
MC3522 is developed to meet the need of audio testing, where a small power amplifier is required to drive the loudspeakers. MC3522 has a built-in 20W power amplifier with a lockable knob. It can also be used with BSWA impedance tube and BSWA VA-Lab software to test the Sound Absorption Coefficient of material. MC3242 is a 4-channel hardware designed using NI 9233 data acquisition card. It can analyze acoustic and vibration signals acquired simultaneously from its 4 channels. MC3242 has two signal output channels. MC3242 is designed for BSWA VA-Lab software.
Interested? Please send us an
BSWA308 Type 1 Integrating Sound Level Meter
Vibrosound Analyser CM3
Nor1207 / Nor1228 ½ inch ICP® microphone and preamplifier set
Nor1451 windscreen, 60mm
Recently Viewed Items