OMNIDOTS SWARM Large scale remote vibration monitoring for structures and buildings
Swarm vibration monitor
Swarm is Omnidots’ vibration monitor to bring vibration measurements within everyone’s reach.
- Measurement according to the DIN4150, DIN4150-3 80Hz, BS7385 250 Hz
- Easy installation
- GPS timing and positioning
- Wifi and 3G data connection with cloud-based web platform
- Compact and lightweight design
- Solid IP65 housing
Honeycomb is the Omnidots web platform, on which measurements are collected and processed into insightful data. The results of the measurements can be accessed via Honeycomb with a computer, tablet, or smartphone, 24 hours a day, 7 days a week. Honeycomb offers different modules in which the measurement data has been converted into graphs and can be processed into reports.
Measurements in accordance with DIN4150, DIN4150-3 80Hz, BS7385 250 Hz
Vibrations measured by the Swarm are tested against the DIN4150, DIN4150-3 80Hz, BS7385 250 Hz guidelines. These guidelines are available for guidance when measuring and assessing damages and inconvenience caused by vibrations. And with one glance at Honeycomb, you can determine whether the vibrations remain within set guidelines.
Exporting measurement data
Measurement data in Honeycomb can be exported in CSV or Excel format.
|Accuracy||10 meter CEP|
|Sensortilt||Maximum velocity level||80 mm/s|
|Alarmsettings||Number of alarm levels||2|
|Typeofmessage||E-mail, SMS and personal dashboard|
OMNIDOTS SWARM V2 SENSOR
VIBRATION MONITORING SYSTEM
|Traces||1000 KHz data|
|Trace length||2-10 seconds|
|Number of traces||100/day|
|Mounting||Included||1 screw,1 plug|
|Sensorpositioning||Autoleveling||Automatically adjustment by gravity|